BRUSH MOWER GC-300-2

It is designed for mounting on a carrier to make heavy duty job easier.
It is equipped with 3 parallel blades to avoid rolling up soil while operating.
It cuts from soft grass to heavy grows.
(For cutting bamboos and scrubs, check out our GC-600)
Easy installation: simple attachment to service port.
(Built-in flow divider with steady circuit)
Pins, bushes simple attachment, can be mounted to various types of excavators.
(Two typs of installation brackets available)
With 79mm cutting width, can be moved forward to both directions makes the job done more efficiently.
SPECIFICATIONS
MODEL GC-300-2
OVERALL DIMENSION L787 x W380 x H760mm
WEIGHT 166kg
HYDRAULIC MOTOR Gear Motor
OIL FLOW RANGE 25-40L/min
RELIEF SET PRESSURE 17.2Mpa
BACK PRESSURE MAX 2.0Mpa
CUTTER DIMENSION L300 x W90 x H4.5mm
BLOW PER MINUTE 2800rpm
CUTTER TORQUE 4.6N.m
CONNECTION 3/8"Coupler
BRUSH MOWER GC-600

Types of blade available:

1.Standard blade: D610 x W2.2 x 40Teeth

2.Blade for soft grass: D610 x W2.2 x 20Teeth

3.Blade for hard grass: D610 x W2.2 x 100Teeth

Easy to be attached to your mini-excavators.
Do the heavy duty grass cutting job in more efficient and easy way.
Equipped with a flow divider, oil flow can be adjusted to fit various types of excavators with stability in rotation while being operated.
Special cutting blades: sharp and durable.
3 types of blades available, cut from soft to hard grass.
SPECIFICATIONS
MODEL GC-600
OVERALL DIMENSION 707 x 645 x 461mm
WEIGHT 56Kg
HYDRAULIC MOTOR Gear Motor
OIL FLOW RANGE 17-40L/min (Built-in flow divider)
RELIEF SET PRESSURE 17.2Mpa
BACK PRESSURE Max. 2.0Mpa
CUTTER DIMENSION D610mm x Width2.2mm x Tooth No. 40(Standard)
BLOW PER MINUTE 2800rpm
CUTTER TORQUE Max. 12.7N.m
PLEASE CONTACT US FOR MORE INFORMATION:
MARUZEN KOGYO CO., LTD.
OVERSEAS TRADING SECTION		 e-mail : overseas@maruzenkogyo.co.jp
TEL: +81-559-77-2140 FAX: +81-559-77-2184
- HYDRAULIC ATTACHMENTS -
Earth Drills Horizontal Earth Drills Breakers Brush Mowers Concrete Crushers